Saw-cut
Straight cuts on the panel saw leave a matt edge with fine tool marks. Fine for edges that go into a frame, channel or wall.
Included
Cut-to-size · laser and CNC
Acrylic cut to size, with edges you can show
Send your sizes or a drawing and we cut the sheet in our Ahmedabad workshop, polish the edges you will see, keep the film on and pack each piece so it arrives without a scratch.
Two machines, chosen by the job
Thin, detailed shapes go on the laser. Thick panels, holes and pockets go on the CNC router. Many jobs use both.
Laser cutting
For letters, logos and fine shapes
A CO2 laser follows your drawing with a beam narrower than a pencil line. On cast sheet it leaves a glossy edge, so laser-cut letters and display parts are ready to fit as they come off the bed.
- Thickness
- 2–12 mm
- Tolerance
- About ±0.2 mm
- Edge
- Glossy on cast sheet
- Best for
- Letters, signs, awards, display parts
CNC routing
For thick panels, holes and pockets
A spinning cutter routes thick sheet without the stress a laser can leave in heavy sections. It drills, countersinks and pockets in the same set-up, and the edge is then diamond or flame polished.
- Thickness
- 2–25 mm
- Tolerance
- About ±0.5 mm
- Edge
- Matt, polished on request
- Best for
- Aquarium panels, furniture, shelves
Edge finishes, explained
The edge is where acrylic shows its quality. Choose the finish for the edges people will see, and save on the ones hidden in a frame.
Diamond-polished
A diamond cutter skims the edge flat and square, leaving a bright, clear finish. Best for straight edges on display and furniture parts.
from ₹25 / running ft
Flame-polished
A fine hydrogen flame melts the very surface of the edge so it turns glossy. Quick on straight and curved edges, but not for parts that will be bonded.
from ₹18 / running ft
Laser edge
The laser beam leaves a glassy edge straight from the machine on cast sheet, so letters and shapes usually need no polishing at all.
With laser cutting
Files and drawings
What to send us
- DXF or DWG drawn at 1:1 in millimetres, with cut lines on one layer and engraving on another.
- AI, SVG or PDF with vector outlines, and text converted to curves.
- A sketch or a list of rectangles with width × height × quantity, which is how most panel orders arrive.
- Mention the edge finish, any holes or countersinks, and whether you need film or paper masking.
We nest your parts on the sheet to use as little material as possible. Offcuts large enough to reuse are yours if you want them sent with the order.
Email drawings to hello@clearcastacrylics.example, or send them on WhatsApp.
Sample price
Priced by area, plus edges
from ₹122 / sq ft3 mm clear cast, straight saw cuts, before GST. Thicker sheet, laser profiles and polished edges are added per job.
- Send sizes or a drawing
- Get a quote with cutting and edges listed
- Pieces cut, polished and checked
- Labelled, masked, packed and dispatched